APJ EngineersAPJ WhatsApp

DG Synchronising Panel Manufacturer

A DG synchronising panel runs two or more diesel generators in parallel on a common bus, so they share the load as one larger source. APJ Engineers builds multi-DG synchronising panels and supplies, installs and commissions complete DG systems from its works in Vasai, near Mumbai.

DG distribution panel at its factory acceptance test, APJ works
DG distribution panel at its factory acceptance test, APJ works

Why synchronise DG sets

  • Capacity: several sets together carry a load that one set cannot
  • Redundancy: if one set trips or is under service, the others keep running
  • Fuel saving: sets are started and stopped to match the load, so each runs near its efficient loading
  • Growth: another set can be added to the bus later

How it works

Before a generator's breaker closes on to a live bus, its voltage, frequency and phase angle must match the bus. A synchronising controller on each set adjusts engine speed and alternator voltage, closes the breaker at the right instant, and then shares active and reactive load between the running sets.

On a mains failure the panel starts the sets, synchronises them and picks up the load. Depending on the scheme, it can also start and stop sets as the load rises and falls.

What APJ builds

Multi-DG synchronising panels with a breaker and controller for each set, a common bus, and outgoing feeders, for DG sets from 15 kVA to 3000 kVA. APJ supplies the complete system: DG sets, acoustic enclosures, AMF and synchronising panels, fuel system, installation, testing and commissioning.

See DG sets and SITC and AMF panels.

What to send for a quotation

  • Single-line diagram (SLD) or BOQ
  • Incomer rating and the fault level at the board
  • Preferred switchgear make, busbar material (copper or aluminium) and IP rating
  • Cable entry (top or bottom) and any size limit at site
  • Delivery location and the date you need it

The full list is in our quotation checklist.

Tested before it leaves

Every panel gets an IEC 61439-1 factory acceptance test with recorded readings, photos and a video, witnessed by the client where they wish. Its FAT QR then opens the full record, including later site and service reports.

How our traceability works

Type-test certificates

  • ASTA 6300 A / 85 kA (forced-cooled)
  • ASTA 4000 A / 65 kA
  • CPRI 4000 A / 65 kA
  • ERDA temperature-rise test, 4000 A
  • ERDA IP65 and IP55
  • ASTA internal arc, 85 kA for 0.5 s

Request a quotation

Tell us what you need. Your request goes straight to our sales team.

Frequently asked questions

What must match before two DG sets are paralleled?

Voltage, frequency, phase sequence and phase angle. The synchronising controller checks these and closes the breaker only when they are within limits.

Can DG sets of different ratings be synchronised?

Yes. The controllers share load in proportion to each set's rating. Give us the rating and make of each set.

Do you also commission the system on site?

Yes. APJ supplies, installs, tests and commissions DG systems, and offers AMC with a report for every visit.

Where are APJ panels made?

At APJ Engineers' own works at Pelhar, Vasai (Palghar district), near Mumbai: Plot No. 333, Pelhar Village, Opp. Apple Industries, Nalasopara Highway Road, Vasai (East), Palghar, Maharashtra 401208, India.

Is every panel tested before dispatch?

Yes. Every panel gets a factory acceptance test (FAT): IEC 61439-1 routine verification with recorded readings, photos and a test video, using instruments with current calibration certificates. A panel is released for dispatch only after its FAT is passed.

Can I check the test record of my panel?

Yes. Each panel carries a FAT QR code. Scan it, or type the code under it on apje.in, to open that panel's FAT report, drawings and site reports.

Do you supply outside Mumbai?

Yes. APJ supplies across India, with on-site supply, installation, testing and commissioning (SITC) teams.

How do I get a quotation?

Send your single-line diagram or BOQ on WhatsApp (+91-9967717710), call +91-9819917710, or email apj@apje.in.